MAGNUM Z-Wave

HOME \ PRODUCT OVERVIEW \ MAGNUM Z-WAVE

MAGNUM Z-wave

Electronic thermostat

MAGNUM Z-wave Polar white – RAL 9010

This Z-Wave thermostat is an electronic thermostat for installation in a standard wall box. The thermostat has a built-in Z-Wave 500 chip which can be connected to home automation systems such as Fibaro, Sensio, Vera, Zipato. The display shows the floor or ambient temperature. 

The thermostat is equipped with touch-sensitive buttons. By lightly pressing the buttons, the display will show the set value. The Z-Wave thermostat is equipped with a single-pole switch. It can be used with two external temperature sensors.

What is Z-Wave? 
Z-Wave is the name of a wireless signal for controlling devices in your home, also known as home automation. In other words, it allows you to program your home (e.g. when does the thermostat go on/off and what temperature). And you can control all this remotely using your tablet or smartphone.

MAGNUM Z-wave (optional) – RAL 9011

Compatible systems
The MAGNUM Z-Wave thermostat works with systems such as Fibaro, Vera, Zipato and Sensio.

Art.nr. DescriptionColor code
825861MAGNUM Z-wave Control for Fibaro, Sensio, Vera and Zipato systemsPolar white – RAL 9010
825860MAGNUM Z-wave Control for Fibaro, Sensio, Vera and Zipato systemsGraphite black – RAL 9011

Specifications

TypeSmart Z-Wave thermostat
Suitable forElectrical systems
ControlTouch buttons
SensorsRoom and floor sensor (10K)
Voltage230V – 50/60Hz
Maximum load16 A / 230V
Temperature range+5 / +40°C
HousingIP21
Functions
WiFiV
AppX through Z-Wave system
Voice assistantX
ProgrammableV
Intelligentie X
Wooden floor V
Open windowX
Slow startX

Warranty
2 year guarantee on the electrical operation and floor sensor.

Technical details

  • Voltage 230 Volt – 50/60 Hz
  • Max. load 16A / 230 V
  • Temperature range +5 / +40°C
  • Class IP21 
  • Color Polar white (RAL 9010) Black (RAL 9011)
  • Certification CE 
  • Power consumption 1,5W
  • Min/Max operating temp. 5°C tot 40°C
  • Temp.interval floor sensor 5°C tot 40°C
  • Temp.interval room sensor 5°C tot 40°C
  • Smartstart Adding the thermostat to a Z-wave network by scanning a supplied QR code
  • Power metering Reading consumption
  • Over The Air Update (OTA) The ability to update the Z-wave wirelessly
  • Room and floor sensor
  • Temperature limiter
  • Power controller
  • Built-in Z-Wave chip 500 series
  • Weekly programme through gateway
  • 7-segment LCD display
  • Can be used in combination with various NTC sensors
  • Lock mode / child lock
  • Backlight
  • Calibration possibility
  • 8 scenarios
  • Works with Fibaro, Sensio, Vera and Zipato systems


    Installation method
  • Suitable for electric heating systems.

Package content

  • Z-Wave Thermostat
  • Installation instructions
  • Floor sensor (10K)